OEIS/3x+1 Problem

Introduction

Collatz sequences are sequences of non-negative integer numbers with a simple construction rule:

Even elements are halved, and odd elements are multiplied by 3 and then incremented by 1.

Since decades it is unknown whether the final cyle 4 - 2 - 1 is always reached for any start value. This problem is the Collatz conjecture, for which the english Wikipedia states:

It is also known as the 3n + 1 conjecture, the Ulam conjecture (after Stanisław Ulam), Kakutani's problem (after Shizuo Kakutani), the Thwaites conjecture (after Sir Bryan Thwaites), Hasse's algorithm (after Helmut Hasse), or the Syracuse problem; the sequence of numbers involved is referred to as the hailstone sequence or hailstone numbers (because the values are usually subject to multiple descents and ascents like hailstones in a cloud), or as wondrous numbers.

Straightforward visualizations of the Collatz sequences no obvious structure. The sequences for the first dozen of start values are rather short, but the sequence for 27 suddenly has 112 elements.

References

• Jeffry C. Lagarias, Ed.: The Ultimate Challenge: The 3x+1 Problem, Amer. Math. Soc., 2010, ISBN 978-8218-4940-8. MBK78
• OEIS A07165: File of first 10K Collatz sequences, ascending start values, with lengths
• Manfred Trümper: The Collatz Problem in the Light of an Infinite Free Semigroup. Chinese Journal of Mathematics, Vol. 2014, Article ID 756917, 21 p.

Collatz Graph

When all Collatz sequences are read backwards, they form the Collatz graph starting with 1, 2, 4, 8 ... . At each node m > 4 in the graph, the path from the root (4) can be continued

• always to m * 2, and
• to (m - 1) / 3 if m ≡ 1 mod 3.

The Collatz conjecture claims that the graphs contains all numbers, and that - except for the leading cycle 1 - 2 - 4 - 1 - 2 - 4 ... - it has the form of a tree (without cycles). We will not consider the trivial cycle, and we start the graph with node 4, the root. Moreover, a trivial path starts when m ≡ 0 mod 3. We call such a path a sprout, and it contains duplications only. A sprout must be added to the graph for any node divisible by 3, therefore we will not consider them for the moment.

Graph Operations

Following Trümper, we use abbreviations for the elementary operations which transform a node (element, number) in the Collatz graph according to the following table (T1):

Name	Mnemonic	Distance to root	Mapping	Condition
d	down	-1	m ↦ m / 2	m ≡ 0 mod 2
u	up	-1	m ↦ 3 * m + 1	(none)
s := ud	spike	-2	m ↦ (m / 2) * 3 + 1	m ≡ 0 mod 2
δ	divide	+1	m ↦ (m - 1) / 3	m ≡ 1 mod 3
µ	multiply	+1	m ↦ m * 2	(none)
σ := δµ	squeeze	+2	m ↦ ((m - 1) / 3) * 2	m ≡ 1 mod 3

We will mainly be interested in the reverse mappings (denoted with greek letters) which move away from the root of the graph.

3-by-2 Replacement

The σ operation, applied to numbers of the form 6 * m - 2, has an interesting property:

(6 * (3 * n) - 2) σ = 4 * 3 * n - 2 =  6 * (2 * n) - 2

In other words, as long as m contains a factor 3, the σ operation maintains the form 6 * x - 2, and it replaces the factor 3 by 2 (it "squeezes" a 3 into a 2). In the opposite direction, the s operation replaces a factor 2 in m by 3.

Segment Construction

We will now construct special subsets of paths in the Collatz graph which we call segments. They lead away from the root, and they always start with a node m ≡ -2 mod 6. Then they split and follow two subpaths in a prescribed sequence of operations. The segment construction process is stopped when the next node in one of the two subpaths becomes divisible by 3, resp. when a δ operation is no more possible. We assemble the segments as rows of an infinite array C[i,j], the so-called segment directory. The columns in one row i of C are constructed as described in the following table (T2):

Column j	Operation	Formula	Condition	Sequence
1		6 * i - 2		4, 10, 16, 22, 28, ...
2	C[i,1] µµ	24 * (i - 1) + 16		16, 40, 64, 88, 112, ...
3	C[i,1] δµµ	24 * (i - 1) / 3 + 4	i ≡ 1 mod 3	4, 28, 52, 76, 100, ...
4	C[i,2] σ	48 * (i - 1) / 3 + 10	i ≡ 1 mod 3	10, 58, 106, 134, ...
5	C[i,3] σ	48 * (i - 7) / 9 + 34	i ≡ 7 mod 9	34, 82, 130, 178, ...
6	C[i,2] σσ	96 * (i - 7) / 9 + 70	i ≡ 7 mod 9	70, 166, 262, 358, ...
7	C[i,3] σσ	96 * (i - 7) / 27 + 22	i ≡ 7 mod 27	22, 118, 214, 310, ...
8	C[i,2] σσσ	192 * (i - 7) / 27 + 46	i ≡ 7 mod 27	46, 238, 430, 622, ...
9	C[i,3] σσσ	192 * (i - 61) / 81 + 142	i ≡ 61 mod 81	142, 334, ...
...	...	...	...	...

The first column(s) C[i,1] will be denoted as the left part of the segment (or of the whole directory), while the columns C[i,j], j > 1 will be the right part.

It is easy to create a segment directory (up to 30000) by a Perl program.

We make a number of claims for segments:

• (C1) All nodes in the segment directory are of the form 6 * n - 2.

This follows from the formula for columns C[i,1..3], and for any higher column numbers from the 3-by-2 replacement property of the σ operation.

• (C2) All segments have a finite length.

At some point the σ operations will have replaced all factors 3 by 2.

• (C3) All nodes in the right part of a segment have the form 6 * (3ⁿ * 2^m * f) - 2 with the same "3-2-free" factor f.

This follows from the operations for columns C[i,1..3], and from the fact that the σ operation maintains this property.

• (C4) All nodes in the right part of a segment are different.

For C[i,1..2] we see that the values modulo 24 are different. For the remaining columns, we see that the exponents of the factors 2 and 3 are different. They are shifted by the σ operations, but they alternate, for example (in the segment with left part 40):

160 = 6 * (33 * 20 * 1) - 2
 52 = 6 * (32 * 20 * 1) - 2
106 = 6 * (32 * 21 * 1) - 2
 34 = 6 * (31 * 21 * 1) - 2
 70 = 6 * (31 * 22 * 1) - 2
 22 = 6 * (30 * 22 * 1) - 2
 46 = 6 * (30 * 23 * 1) - 2

• (C5) There is no cycle in a segment.

Segment Lengths

The segment directory is obviously very structured. The lengths of the compressed segments follow the pattern

4 2 2 4 2 2 L1 2 2 4 2 2 4 2 2 L2 2 2 4 2 2 ...

with two fixed lengths 2 and 4 and some variable lengths L₁, L₂ ... > 4. For the left parts 4, 40, 364, 3280, 29524 (OEIS A191681), the segment lengths have high values 4, 8, 12, 16, 20 which did not occur before. Those left parts are (9ⁿ⁺¹ - 1) / 2, or 4 * Sum(9ⁱ, i = 0..n).

Coverage of the Right Part

We now examine the modular conditions which result from the segment construction table in order to find out how the numbers of the form 6 * n - 2 are covered by the right part of the segment directory, as shown in the following table (T3):

Columns j	Covered	Remaining
2-3	4, 16 mod 24	10, 22, 34, 46 mod 48
3-4	10, 34 mod 48	22, 46, 70, 94 mod 96
5-6	70, 22 mod 96	46, 94, 142, 190 mod 192
7-8	46, 142 mod 192	94, 190, 286, 382 mod 384
...	...	...

We can always exclude the first and the third element remaining so far by looking in the next two columns of segments with sufficient length.

• (C6) There is no limit on the length of a segment.

We only need to take a segment which, in its right part, has a factor of 3 with a sufficiently high power, and the σ operations will stretch out the segment accordingly.

Therefore we can continue the modulus table above indefinitely, which leads us to the claim:

• (C7) All numbers of the form 6 * n - 2 occur exactly once in the right part of the segment directory.

The sequences defined by the columns in the right part all have different modulus conditions. Therefore they are all disjoint.

Segment Connectivity Sieve

The segments represent small trees with two branches. We now start an Gedankenexperiment analogous to Hilbert's hotel. We consider simultaneously all rows i > 1 (omitting the root) in C which fulfill some modularity condition (the source row in C), and we attach (identify, connect) them to their unique occurrence in the right part of C (target row and column).

A technical implementation of the process (which is impossible for infinite sets) would perhaps replace the target node by a pointer to the source segment.

We sieve the segments: Once we have attached a set of segments, we strike it out of the list still to be examined. The attachment rules are shown in the following table (T4):

Source Row i	Target Row	Column	Remaining Rows	Fraction
i ≡ 3 mod 4	((i - 3) / 4) * 30 + 1	2	i ≡ 0, 1, 2 mod 4	3/4
i ≡ 1 mod 4	((i - 1) / 4) * 31 + 1	3	i ≡ 0, 2, 4, 6 mod 8	1/2
i ≡ 2 mod 8	((i - 2) / 8) * 31 + 1	4	i ≡ 0, 4, 6 mod 8	3/8
i ≡ 6 mod 8	((i - 6) / 8) * 32 + 7	5	i ≡ 0, 4, 8, 12 mod 16	1/4
i ≡ 12 mod 16	((i - 12) / 16) * 32 + 7	6	i ≡ 0, 4, 8 mod 16	3/16
i ≡ 4 mod 16	((i - 4) / 16) * 33 + 7	7	i ≡ 0, 8, 16, 24 mod 32	1/8
i ≡ 8 mod 32	((i - 8) / 32) * 33 + 7	8	i ≡ 0, 16, 24 mod 32	3/32
i ≡ 24 mod 32	((i - 24) / 32) * 34 + 61	9	i ≡ 0, 16, 32, 48 mod 64	1/16
i ≡ 48 mod 64	((i - 48) / 64) * 34 + 61	10	i ≡ 0, 16, 32 mod 64	3/64
i ≡ 16 mod 64	((i - 16) / 64) * 35 + 61	11	i ≡ 0, 32, 64, 96 mod 128	1/32
...	...	...	...	...

The ellipsis row of this table could be explained in terms of i, but it should be obvious how it can be constructed. The residues of 2^k in the first column are 3 * 2^k-2, 1 * 2^k-2 in an alternating sequence. The additive constants in the second column are the indexes of the variable length segments with left parts (4), 40, 364, 3280, 29524 (OEIS A191681) mentioned above. They are repeated 4 times since the corresponding lengths "jump" by 4.

Example

82 is a node with a long Collatz sequence. The following list (L1) shows - via the highlighted numbers - how segments are attached:

          1     2     3     4     5     6     7     8     9    10    11    12 
C[ 14]   82   328 
C[ 16]   94   376   124   250    82   166
C[ 61]  364  1456   484   970   322   646   214   430   142   286    94   190 
C[ 46]  274  1096   364   730 
C[ 52]  310  1240   412   826   274   550 
C[ 88]  526  2104   700  1402  466  934  310  622 
C[223] 1336  5344  1780  3562  1186  2374   790  1582   526  1054 
C[ 56]  334  1336 
C[142]  850  3400  1132  2266   754  1510   502  1006   334   670 
C[160]  958  3832  1276  2554   850  1702 
C[304] 1822  7288  2428  4858  1618  3238  1078  2158   718  1438   478   958 
C[385] 2308  9232  3076  6154  2050  4102  1366  2734   910  1822 
C[289] 1732  6928  2308  4618 
C[217] 1300  5200  1732  3466 
C[163]  976  3904  1300  2602 
C[ 41]  244   976 
C[ 31]  184   736   244   490 
C[  8]   46   184 
C[  7]   40   160    52   106    34    70    22    46 
C[  2]   10    40 
C[  1]    4    16     4    10 

Segment Tree

• (C8) The process does not create any cycle.

All involved subtrees are disjoint. The process attaches trees to other trees, the results are trees again.

• (C9) Any source row will finally be attached to the tree starting at the root segment.

Similiar to the arguments for coverage, we have to apply the rules from table T4 one after the other up to a sufficiently high row (corresponding to a sufficiently long variable segment).

Collatz Tree

• (C10) The segment tree is a subgraph of the Collatz graph.

The edges of the segment tree carry combined operations µµ, δµµ and σ = δµ.

So far, numbers of the form x ≡ 0, 1, 2, 3, 5 mod 6 are missing from the segment tree.

We insert intermediate nodes into the segment tree by applying operations on the left parts of the segments as shown in the following table (T5):

Operation	Condition	Resulting Nodes	Remaining Nodes
δ		2 * i - 1	i ≡ 0, 2, 6, 8 mod 12
µ		12 * i - 4	i ≡ 0, 2, 6 mod 12
δµ	i ≡ 1, 2 mod 3	4 * i - 2	i ≡ 0, 12 mod 24
δµµ	i ≡ 2 mod 3	8 * i - 4	i ≡ 0 mod 24
δµµµ	i ≡ 2 mod 3	16 * i - 8	(none)

The first three rows in T5 care for the intermediate nodes at the beginning of the segment construction with columns 1, 2, 3. Rows 4 and 5 generate the sprouts (starting at multiples of 3) which are not contained in the segment directory.

We call such a construction a detailed segment (in contrast to the compressed segments described above).

A detailed segment directory can be created by the same Perl program. In that directory, the two subpaths of a segment are shown in two lines. Only the highlighted nodes are unique.

• (C11) The connectivity of the segment tree remains unaffected by the insertions.
• (C12) With the insertions of T5, the segment tree covers the whole Collatz graph.
• (C13) The Collatz graph is a tree (except for the trivial cycle).